GYXTC8S FIG 8 UNITUBE ARMORED FIBER OPTIC CABLE SPECIFICATION

Short Description:

In the GYXTC8S cable,single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound.PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices of it.Then.this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure.

100% ISO IEC Certificated Manufacturer ,Help You Save Purchase Cost ! Click send inquiry to get best offer and free sample now !

Send email to us

Product Detail

Product Tags

Video

Cable Design

Application: Self supporting Aerial
1. High performance optical network operating.
2. High speed optical routes in buildings (FTTX).
3. All types of fiber cables with different structures.
Standards:
Comply with stand YD/T 901-2009 as well as IEC 60794-1

Application:

Self supporting Aerial
1. High performance optical network operating.
2. High speed optical routes in buildings (FTTX).
3. All types of fiber cables with different structures.

Temperature Range

Operating :-40℃ to +70℃
Storage :-40℃ to +70℃

Characteristic

1. Excellent mechanical and temperature performance
2. Critical protection to fibers.

Structure Construction

Tube:Unit tube single mode
Water block:Gelly filling compound in tube and water block yarn and water swellable tape triple protection
Reinforcing: High modulus Steel Armored tape
Sheath: UV stabilised polyethylene in
Messenger wire :High strength 7strands Galvanized steel wire

Technical data sheet

Part code	JH-Fig8 GYXTC8S XXXF
Number of Fibers	Unit	4-12
Loose tube	Material	PBT
Armored	Material	Corrugated steel tape
Water block	Material	Gelly filling compound
Messenger wire	Size and material	0.9*7mm Galvanized steel wire
Outer sheath	Material	PE	PE
Cable nominal Diameter	MM ±0.2	7x13.5
Cable nominal weight	Kg/Km ±5	105
Max. working tension	N	1800
Max. crush resistance	N	2200 (Short term) / 1100 (Long term)
Min. bending radius		At full load 20 x Cable OD (including poles) At no load 15 x Cable OD
Temperature range		Installation -0 -> +50 Operation -10 -> +70

Optical Characteristics SINGLE MODE G652D

Mode Field Diameter @ 1310 nm		8.7-9.5 mum

Mode Field Diameter @ 1550 nm		9.8-10.8mum

Cladding diameter		125.0 ±± 0.7mm

Core/cladding concentricity error		0.6 um
Cladding non-circularity		1.0 %
Refractive index profile		Step
Design		Matched cladding
Primary coating material		UV curable acrylate
Primary coating Diameter		235-250um
Optical Characteristics
Attenuation	@ 1310nm	£ 0.36 dB/km (cabling)
	@ 1383±3nm	£ 0.34 dB/km
	@ 1550nm	£ 0.22dB/km (cabling)
Dispersion	@ 1288 ~ 1339nm	£ 3.5 ps/nm×km
	@ 1550nm	£ 18 ps/nm×km


Zero dispersion wavelength		1300 – 1324 nm
Dispersion slope at zero dispersion wavelength		£ 0.092 ps/nm²×km
Cabled cut-off wavelength (lcc)		£ 1260 nm
Polarization mode dispersion link value		£ 0.2 ps/√_km
Mechanical Characteristics
Proof stress level		≥0.69 GPa
The loss increase of 100 turns of fiber loosely wound with		£0.05dB (at 1550nm)
25mm radius
Effective group index of refraction Neff		1.466(at 1310nm)
Effective group index of refraction Neff		1.467 (at 1550nm)

Identification

The fibers shall be marked by a coloured coating with 12 different colours according to EIA/TIA 598:

Fibre #1: Blue Fibre #7: Red

Fibre #2: Orange Fibre #8: Black (natural with being marked

Fibre #3: Green Fibre #9: Yellow

Fibre #4: Brown Fibre #10: Violet

Fibre #5: Grey Fibre #11: Pink

Fibre #6: White Fibre #12: Aqua (Light Blue)

No.	1	2	3	4	5	6	7	8	9	10	11	12
Colour	blue	orange	green	brown	grey	white	red	black	yellow	violet	pink	aqua

Sheath Colour:
The outer sheath colour is black or white
Sheath Marking:
The outer sheath is marked white color in 1 metre intervals as follows:
JIAHOME or your brand FIG GYXTC8S PART NUMBER OR YOUR ORDER NUMBER year of
Note:The sheath with color strip are available ,should be inform before production

Packing:

Fumigated stronger wooden coil or iron wooden coil idea for long distance delivery .and idea size for the optimized the container loading
Delivery length :2-6km

Main mechanical Factory Routine Test

Parameter	Test method	Test conditions	Acceptance criteria*
Tensile strength	IEC 60794-1-21-E1	As per cable maximum tensile strength (max. Working tension) in table above	After 30 minutes the maximum strain on the fibre should not exceed 0.2% and no attenuation change throughout test
Crush	IEC 60794-1-21-E3	Short time: 10 min Long time: 120 min Load: As per maximum crush resistance in table above Number of positions: 3 adjacent sections (ensuring one over tube and one over lay reversal	No damage to the sheath or to the core structure and no attenuation change throughout test
Impact	IEC 60794-1-21-E4	Weight: 1.5 kgHeight: 1.0 m Anvil radius: 12.5 mm Impacts: 1	After 5 minutes no fibre breaks, no damage to the sheath or to the core structure and no attenuation change throughout test
Torsion	IEC 60794-1-21-E7	Sample length: 1 mRotation: a) 180º clockwise, b) return to starting position, c) 180º anticlockwise, d) return to starting position. Four movements constitute one cycle). Complete 10 cycles (a to d) in one minute maximum	During the final tenth cycle at a), c) and after completion (no rotation) check transmitting fibres. No fibre breaks, no damage to the sheath or to thecore structure and no attenuation change throughout test
BendBend under tension	IEC 60794-1-21- E11Concurrent to tensile test IEC 60794-1-21-E18A	Mandrel diameter: 30 x Cable OD Bend: 360º (1turn)Mandrel diameter: 40 x Cable OD Bend: 360º (1turn)	No attenuation change throughout test After 1minutenofibre breaks, no damage to thes heath or to the core structure and no attenuation change throughout test
Temperature cycling	IEC 60794-1-22-F1	Sample length: 1000 m (minimum)Temperature range: – 10 °C to +70 °C